Integra DTR-6.3 - 6.1 Ch. A-BUS Ready Home Theater Receiver (Onkyo USA)

schade schade , wäre der 230 V geeignet würde ich den nehmen .
Aber mit Wandler ist mir leider zu teuer .
Mann ...

Hier noch ein paar mehr Details.

Integra DTR-6.3 - 6.1 Channel A-BUS Ready Home Theater Receiver (Onkyo USA)

http://www.gardi.de/eb/IntegraDTR-63/DTR-6(3)_front.jpg

http://www.gardi.de/eb/IntegraDTR-63/DTR-6(3)_rear.jpg

Original Fotos hier:

http://www.gardi.de/eb/IntegraDTR-63/DTR-63_rechts.jpg

http://www.gardi.de/eb/IntegraDTR-63/DTR-63_front.jpg

http://www.gardi.de/eb/IntegraDTR-63/DTR-63_links.jpg

http://www.gardi.de/eb/IntegraDTR-63/DTR-63_rear.jpg

Amplifier Features

100 W × 2 (Front)/ 100 W (Center)/ 100 W × 2 (Surround)/ 100 W (Surround Back) at 8 ohms, 20 Hz - 20 kHz, 0.08 % THD (FTC rated)

Wide Range Amplifier Technology (WRAT)

Powered Zone 2 Capability

State-of-the-art linear PCM 192kHz/24-bit DACs for L/R channels

Optimum gain volume circuitry

A-BUS Ready

Audio/Video Features

Dolby®* Digital, Dolby Digital EX, Dolby Pro Logic II

DTS, DTS-ES Extended Surround, DTS Neo:6

Non-Scaling Configuration

CinemaFILTER

“Easy-set” speaker configuration

Pure Audio Mode

Crossover Adjustment (80/100/120 Hz)

Onscreen graphical displays

Digital Outputs (1 coaxial, 1 optical)

2 component video inputs and 1 output

3 Assignable digital inputs (1 coaxial, 2 optical)

5 S-Video inputs and 3 outputs

Front panel A/V, S-Video, Optical inputs

Multi channel input for DVD-Audio

Rec out selector and Zone 2 selector

Pre-out terminals for Front L/R, Center, Surround L/R, Surround Back, Subwoofer and Zone 2 L/R

Zone 2 Line out

Color-coded speaker terminals

FM/AM Tuner Features

40 FM/AM random presets

FM auto tuning

Other Performance Features

IntelliVolume

12V Trigger output (A/B/for Zone 2)

IR input/output terminals

Powerful backlit/preprogrammed learning remote with macro and mode-key LEDs

ohne Fernbedienung Onkyo/Integra RC-481M



Specifications (DTR-6.3)

AMPLIFIER SECTION

Continuous average power output (FTC)

All channels: 100 W per channel min. RMS at 8 Ω, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion.

125 W min. RMS at 6 Ω, 2 channels driven from 1 kHz with no more than 0.1% total harmonic distortion.

Continuous power output (DIN) 130 W at 6 Ω Maximum power output (EIAJ) 160 W at 6 Ω

Dynamic power output (stereo) 2 × 250 W at 3 Ω 2 × 210 W at 4 Ω 2 × 130 W at 8 Ω Total harmonic distortion: 0.08% at rated power 0.08% at 1 W output IM distortion: 0.08% at rated power 0.08% at 1 W output Damping factor: 60 at 8 Ω

Input sensitivity and impedance PHONO: 2.5 mV, 47 kΩ, LINE (CD, TAPE, DVD, VIDEO 1-4): 200 mV, 47 kΩ, MULTICHANNEL INPUT (FRONT L/C/R, SURROUND L/R): 200 mV, 47 kΩ (SUBWOOFER): 36 mV, 47 kΩ, COAXIAL (DIGITAL): 0.5 Vp-p, 75 Ω, DVD, VIDEO 1, 2, 3, 4: 1 Vp-p, 75 Ω, 1 Vp-p, 75 Ω (Y) 0.28 Vp-p, 75 Ω (C) COMPONENT VIDEO 1, 2: 1 Vp-p, 75 Ω (Y) 0.7 Vp-p, 75 Ω (PB, PR)

Output level and impedance Rec out (TAPE, VIDEO 1, 2): 200 mV, 470 Ω, Line out (zone 2): 100 mV, 470 Ω, Pre out: 1 V, 470 Ω, VIDEO (VIDEO 1, 2, MONITOR OUT): 1 Vp-p, 75 Ω 1 Vp-p, 75 Ω (Y) 0.28 p-p, 75 Ω (C) COMPONENT VIDEO OUT: 1 Vp-p, 75 Ω (Y) 0.7 Vp-p, 75 Ω (PB, PR) Phono overload: 70 mV RMS at 1 kHz, 0.5% T.H.D.

Frequency response: 10 Hz to 100 kHz : +1/–3 dB (CD in Direct mode) RIAA deviation: 20 Hz to 20 kHz : ±0.8 dB

Tone control Bass: ±12 dB at 50 Hz, Treble: ±12 dB at 20,000 Hz

Signal-to-noise ratio (stereo) Phono: 80 dB (IHF A, 5 mV input), CD/Tape: 100 dB (IHF A, 0.5 V input) Muting: –50 dB

TUNER SECTION

FM Tuning range: 87.5–108.0 MHz (50-kHz steps) Usable sensitivity Mono: 11.2 dBf, 1.0 μV (75 Ω IHF) 0.9 μV (75 Ω DIN) Stereo: 17.2 dBf, 2.0 μV (75 Ω IHF) 23 μV (75 Ω DIN) 50 dB quieting sensitivity

Mono: 17.2 dBf, 2.0 μV (75 Ω), Stereo: 37.2 dBf, 20 μV (75 Ω)

Capture ratio: 2.0 dB, Image rejection ratio: 40 dB, IF rejection ratio: 90 dB, Signal-to-noise ratio Mono: 76 dB, Stereo: 70 dB, Alternate channel attenuation: 55 dB, Selectivity: 50 dB (DIN), AM suppression ratio: 50 dB, Total harmonic distortion Mono: 0.2%, Stereo: 0.3% Frequency response: 30 Hz–15 kHz, ±1.0 dB, Stereo separation: 45 dB at 1 kHz, 30 dB at 100 Hz–10 kHz

AM Tuning range: 530 to 1,710 kHz (10-kHz steps) Usable sensitivity: 30 μV, Image rejection ratio: 40 dB, IF rejection ratio: 40 dB, Signal-to-noise ratio: 40 dB, Total harmonic distortion: 0.7%

GENERAL

Power supply: AC 120 V, 60 Hz, Power consumption: 6.7 A

Dimensions (W × H × D): 17-1/8" × 6-7/8" × 17", Weight: 26.9 lbs. 12,2 kg

Versand oder persönliche Abholung bis spätestens Freitag 11.07. danach Urlaub.